Don Lewis’ Garden Guide

If you’re looking for ways to keep your garden watered without wasting too much time and money, you’ve probably gone through a lot of options in your mind. Maybe you’ve considered a sprinkler, a hose, or a good old-fashioned watering can. All of these methods might be convenient, but most of the time you will end up wasting water on plants that don’t need any more. If you live in a drought stricken area like I do, you know that every bit of water counts. I ended up getting a drip irrigation system. I haven’t regretted this decision at all.

When you install a drip irrigation system, you can choose one of two varieties: above ground and below ground. The above ground version drips small amounts of water continuously onto the ground, and allows it to soak in. It is all regulated from a pressure controller, which ensures that the water just comes out at a drip instead of a spray or a stream. These pressure regulators are very inexpensive. The whole drip system can be set up with a pressure regulator and a garden hose with holes poked in it (although it is ideal for you to get a pipe designed for this type of use, I’ve found that the hose method works acceptably). Continue Reading »

The one thing that usually shocks new tree growers is the fact that the fruits produced by their tree are much smaller than the ones they’re used to seeing at the grocery store. “What is wrong with my tree?!”, “My God! What have I done!?” are some cried you may hear from the disgruntled tree grower. However, small fruits are a natural occurrence. But while smaller fruits might be what nature originally intended, it is possible to attain larger fruits without any genetic altering or added chemicals. It is only through advanced techniques that the professionals reach such large sizes with their fruits.

Usually in the early stages of a fruit trees growing, veterans do something called “fruit thinning”. The theory behind this process is that with less fruits to pay attention to, the tree will be able to more efficiently send cells to the leftover fruits. When there are hundreds of little fruits on one tree, competing for the available materials necessary for growth, you will most likely just end up with a bunch of stunted fruits. To take care of this problem, simply pluck a third of the fruits extremely early on in the process. You should notice larger fruits that season. Continue Reading »

Usually the main motivation for planting a fruit tree is just the joy of maintaining a tree and eating the delicious fruit that comes from it. However, in my personal experience it is possible to go on a quite lucrative venture with fruit trees by operating a fruit stand or participating in a farmer’s market.

When I moved to Florida, I was slightly depressed at the fact that I had just left behind years and years of hard work to get my lawn to the point it was. However, I was able to healthily channel this depression into the desire to get a new and more beautiful garden and lawn setup going. The house I moved into was nice, but the previous owner obviously had no gardening prowess. The lawn was barren of any features besides grass. Lots and lots of grass. Continue Reading »

If you want to protect your fruit tree from pests during the summer, this is almost impossible to accomplish without the use of pesticides or chemicals. This might scare some people into thinking that the actual fruits will contain traces of the chemicals. If you do things correctly, you can get rid of all the pests and not infect the actual tree. If you’re going to be spraying chemicals, you most likely will be using either a handheld pump or a hose-end sprayer.

If you’re using the pump sprayers, you will be able to more accurately determine the mixing of the chemicals. Unfortunately, you won’t be able to spray it very far. Usually it won’t reach the tops of trees. This can be achieved with the hose end sprayers, but getting the correct mix of chemicals is quite a challenge. It all depends on your water pressure to get the correct mixture of chemicals, but water pressure is not constant. One day it might be lower, in which case your chemical content would be higher. The types of materials you buy for hose application are generally in an extremely strong form. They need to be severely diluted before they are weak enough to apply. Continue Reading »